EO Flanges is a well-known factory of ASTM A512 Mechanical Tube, which has soaring tensile potency. EO Flanges is made from continuous welded tube hollows, drawn to size with a mandrel. ASTM A512 Mechanical Tube is cold drawn for the purpose of obtaining dimensional accuracy and improved mechanical properties. Applications include axles, truck and railroad parts, and many more where weight-to-strength ratio and tolerances are important.
ASTM A512 Mechanical Tube Standard for Cold-Drawn EO Carbon Steel Mechanical Tubing covers cold-drawn EO carbon steel tubes for use as round, square, rectangular or special shape mechanical tubing. The carbon steel can be made unless a specific type of melting process is required by the purchaser.
ASTM A512 Mechanical Tube covers cold-drawn EO carbon steel tubes for use as mechanical tubing. ASTM A512 Mechanical Tube covers round, square, rectangular, and special shape mechanical tubing.
Round tube size ranges covered are outside diameters up to 3 1/2 in. (88.9 mm) and wall thickness from 0.035 to 0.500 in. (0.89 to 12.70 mm).
Heat and product analysis shall be made to determine the specified percentages of chemical composition to which steel tube shall conform to. The tubing shall be free of injurious defects and shall have a workmanlike finish. Unless otherwise specified, both outside and inside surfaces of the tubing shall be coated with a film of rust-retarding oil before shipping.
ASTM A512 Mechanical Tube Diameter table:
OD Size Range Inches
OD Tolerance Inches
ID Tolerance Inches
0.500 to 1.499
1.500 & Over
*Under 0.500 inch ID a greater tolerance may be required.
Production flow of ASTM A512 Mechanical Tube
Packaging for ASTM A512 Mechanical Tube in bundles wrapped with strong steel strip, seaworthy packing, or according to customers’ requirements.
Delivery of ASTM A512 Mechanical Tube is normally 15-30days after receiving T/T deposit
Q: Are you a trading company or a manufacturer?
A: we are factories, and we do trade as well
Question: how long is your delivery time of ASTM A512 Mechanical Tubes?
A: If ASTM A512 Mechanical Tubes are in stock, it usually takes 5-10 days. If ASTM A512 Mechanical Tubes are not in stock, they are for 15-20 days, according to quantity.
Q: Do you provide ASTM A512 Mechanical Tubes samples? Is it free or extra?
A: Yes, we can supply the ASTM A512 Mechanical Tubes sample free of charge, but we don't pay the freight.
Q: What are your terms of payment for ASTM A512 Mechanical Tubes?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance, balance before shipment.